central siding » Installation

How to build a garage – 16 1/2″ PEX Radiant tubing Installation Over Joists

Fri, 13 Apr 2012 02:46:33 +0000

This is how I decided to run my radiant tubes. I’m running 1/2″ pex over the joist, instead of drilling holes after and running the entire spool through them, I tried this method to much sucess! This is the best price I’ve found for Pex tubing. I’ve bought 3 rolls of this stuff, and it’s awesome. – amzn.to More on radiant tubing install here…. hands.onthis.net This is part of the “How to Build a Garage” time lapse video series which can be seen here hands.onthis.net. All my videos are done in 1080p HD 30fps. Edited with Final Cut Pro X, and Either Aperture 3 or Lightroom 3. Shot with either the GoPro Hero or Hero2 HD wide or the Nikon D5100, with the 35mm f or my Tokina 11-16mm f/2.8. Follow me on Twitter here – twitter.com Read my VIDEO blog – fstop.onthis.net Read my WORK blog – http

Wood Fence Installation Tips: Installing Posts and Pickets

Sun, 08 Apr 2012 02:45:51 +0000

Lowe’s home improvement expert, Mike Kraft, shows how to install wooden fence posts and pickets when building a new fence. First, set the posts. If you need to cut the fence post to length, you can cut it now. Before you put the post into the holes, add gravel for drainage. Then set the post in place, holding it with braces, and add cement two inches below the surface. After the concrete has dried, you can start adding the fence rails. Follow the land for any contours and adjust the rails as necessary. Attach the rails outside of the top, middle and bottom of each post. You can cut any excess rails once attached. After the rails are all set and attached, you can start putting on the fence pickets. Attach the boards with nails, making sure each picket is close the previous one. At the fence edges, overlap the picket edges to make sure that you have an even and clean corner. To learn more about wood fence installation or to find the printable instructions for this video, visit www.Lowes.com

Aluminum drip cap installation

Wed, 14 Mar 2012 02:46:25 +0000

Guide to installing an aluminum drip cap on an exterior window.

Gorell Replacement Bow and Bay Window Installation – Part 1 of 2

Wed, 07 Mar 2012 02:46:06 +0000

www.gorell.com – The following video is designed to assist trained home improvement professionals in installing Gorell bow or bay windows properly. This is part 1 of 2 in a series.

Customer Feedback from Wall Vinyl Installation

Thu, 16 Feb 2012 02:47:32 +0000

Customer Feedback from Wall Vinyl Installation. Custom install of wall graphics on concrete cinder block wall for school.

What is the best method to get the best price on vinyl siding and installation?

Tue, 13 Dec 2011 02:49:50 +0000

What is the average installation price on vinyl siding by the square?

Fri, 28 Oct 2011 02:54:40 +0000

Is there anyone in the Kansas City, MO area willing to do a vinyl siding installation cheap?

Sun, 18 Sep 2011 02:46:00 +0000

I am sick of receiving bids for $25,000-40,000 when there is absolutely no reason for it to be that high! If you are a professional sider who would be willing to guarantee your work and do it at a very fair price, please send me a message with your bid. I do not want the bottom of the line siding and I know I can purchase it myself for much less than what I would pay for a sider to purchase it. I am strictly asking for someone to come in and do the job, and do it right!
Is there anyone in the Kansas City, MO area willing to do a vinyl siding installation cheap?
I am sick of receiving bids for $25,000-40,000 when there is absolutely no reason for it to be that high! If you are a professional sider who would be willing to guarantee your work and do it at a very fair price, please send me a message with your bid. I do not want the bottom of the line siding.

The house is rougly 3,500 sq. ft.
The soffet and fascia is 335 sq. ft.
4 sq. ft for porch ceiling.
2 garage door wraps
3 entry door wraps
46 feet of fascia

TPO Roofing Installation

Sun, 21 Aug 2011 02:54:01 +0000

TPO or Thermalplastic Olefin is a great way to water proof your low slope roof and reflect the sun’s heat.

Installation of outdoor wall lantern on vinyl siding?

Thu, 09 Jun 2011 02:46:33 +0000

I’m looking to update my outdoor rear entry light. It’s currently installed on vinyl siding, however there is no base plate installed and it’s wobbly and doesn’t “sit” right. I know they make wooden plates solely for this purpose. Question: What is this plate called, and what is the best way to install it? I’m pretty handy, but want a professional looking job.